W210 Startup
I would apprciate some advice.
When replacing glowplugs one, closed to rear of the engine, broke. I removed the starter + oil filter housing to be able to work and try to removed. It was not possible.
Then I put everything back, including reconnecting the Crankshaft sensor, and the manifold, except that I forgot to connect the two tubes, one EGR, to it. I reconnected the battery and tried to start the car. After a few cranks started.
Then I turned the engine off, bolted the manifold properly, connected the tubes to the manifold, reconnected the fuel lines to a diesel purge bottle so I could clean the system a little bit. Then I recranck without any success. I checked the transparent fuel line going to the diesel purge and they are empty.
Do you have any advice to get it started?
PAT
__________________
pat201
|