|
Before you take out the tumbler, check to see if the vacuum shhut off switch is attached to tightly. If it is too tight, the cam on the tumbler gets blocked and you cannot move the key all the way to 'start'. I had this happen to me when I replaced the vss on my 300SD. A couple small washers and the key turned all the way.
__________________
"I have no convictions ... I blow with the wind, and the prevailing wind happens to be from Vichy"
Current
Monika '74 450 SL
BrownHilda '79 280SL
FoxyCleopatra '99 Chevy Suburban
Scarlett 2014 Jeep Cherokee
Krystal 2004 Volvo S60
Gone
'74 Jeep CJ5
'97 Jeep ZJ Laredo
Rudolf ‘86 300SDL
Bruno '81 300SD
Fritzi '84 BMW
'92 Subaru
'96 Impala SS
'71 Buick GS conv
'67 GTO conv
'63 Corvair conv
'57 Nomad
|