I changed the transmission oil filter and the gasket on the pan. Then I filled the trans with oil, and adjusted the level with the engine running and the car in park. Now, I have a leak from the seal. I torqued the pan to 6 pounds. I have taken the pan off and checked the seal fit, which looked good, then replaced it, and retorqued it again.
Any ideas what is wrong?? Should I be using some spray gasket sealer??

__________________
All it takes for evil to prevail is for good men to stand by and do nothing.

Too many people tip toe through life, never attempting or doing anything great, hoping to make it safely to death... Bob Proctor

'95 S320 LWB
'87 300SDL
'04 E500 wagon 4matic