View Single Post
  #2  
Old 08-10-1999, 10:01 PM
Benzmac Benzmac is offline
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
Actually if you use a LED it will work. Just connect the positive side to the pin to be tested and the negative to the ground. Now just jump a wire from the pin to be tested to ground for 3 seconds and the LED will flash the code.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM