Went back and checked all fuses to ground and the readings are 12V, also checked for continuity on the fuses in the BM and they show 0V.
I did check the N59 at pin 4 I got a reading of 3.1V to ground. Pin 9 gave me 12V.
Mike I think your right that there is a bad lan in a module.
The LED on the X11/22 always being lit with the ignition being on is confusing along with a 9V voltage reading on pin 4 also on the X11/22.
The codes all show OPENS but this is looking more like a SHORT somewhere in a module.

__________________
Mark