View Single Post
  #35  
Old 04-15-2002, 07:31 PM
jsmith's Avatar
jsmith jsmith is offline
Ronin
 
Join Date: Aug 2001
Location: At Sea
Posts: 1,729
carman850,

from the schematic and from checking the relay functions, i determined that the momentary contact poles are shown in this picture. i figured that the connection between those two are what need to be snipped. it appears that the etchings are on the other side of the board. now did you have to desolder and remove the relay to get at the connection between the two pins?
help! i didn't count on having to do that - i just might send the thing back!

thanks
Attached Thumbnails
W126 keyless entry installation-pcb.jpg  
__________________
joE
1993 300e-2.8
- gone now <sigh>
"Do not adjust your mind, it's reality that's malfunctioning"
http://banners.wunderground.com/bann...L/Key_West.gif
Reply With Quote