Quote:
Originally Posted by dlssmith
I guess the 46 is fully converted to 12 volts, but did you change the key switch too, or are you using the floor starter switch? Anyway, I'd consider looking at the switch if the earlier suggestion doesn't help.
|
It is the original key switch, with a push button to excite the starter circut. I am at present sending 12 volts to the "start" side of the balast resistor, by way of a jumper wire.. I will put a different key/starter switch on it once all the bugs are removed..
BUT I will try 12 volts to the coil to see if the balast resistor is the fault...