11-30-2008, 10:12 PM
|
10mm MW
|
|
Join Date: Sep 2008
Location: Michigan
Posts: 767
|
|
Quote:
Originally Posted by GREASY_BEAST
interesting...
I imagine this would coincide with a complete removal of the end of the tube with the holes in it?
If this were the case then the PC just became a swirl chamber.
Would this put the piston/rings/etc at risk from shocks, or something?
...I wonder if you couldn't achieve a similar thing more simply with a series of pins offset from eachother stuck through the tube...
|
My thought was to leave the bottom and cut a horizontal slot (burn hole to burn hole) that will allow for a higher flow rate, allow the exiting gasses to fan out into the main chamber parallel to the piston and the head, and keep the heat from concentrating on one location of the piston, ( if the tube bottom was removed).
|