View Single Post
  #12  
Old 12-02-2008, 01:36 PM
duxthe1 duxthe1 is offline
Registered User
 
Join Date: Oct 2004
Posts: 3,276
That's a nice clean organized looking board. If everything works as planned I am going to be looking into making PCBs. If that time comes, you're my man. Etching a board is something I don't have experience with. All of my projects to date have been on prototype boards. I've tried downloading a few free schematic editors that can design the PCB layout but havn't had much luck with any of them. There always seems to be a catch, like needing to define component footprints and such.
__________________
90 300TE 4-M

Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197 intake cam w/20 advancer
4 ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff
Reply With Quote