View Single Post
Old 04-23-2002, 10:32 PM
euro 287 euro 287 is offline
Senior Member
Join Date: Apr 2001
Location: Baton Rouge
Posts: 485
Tips , make sure you replace all head bolts, blow out all head bolt threads in block and make sure you reseal lower timing cover while you are down that far, make sure to use permatex (right stuff) . Make sure all areas are clean ( cover and block) or it will leak. Watch dowell pins when removing head( dowels in between head and intake.) You can remove head without pulling intake it just moves over about an inch or so. Good luck if you need tips just post it.
euro 287
Mercedes Technician 7 Years (retired to Hyundai)
2000 Dodge Durango
98 Mazda truck
Reply With Quote