View Single Post
  #4  
Old 04-24-2002, 06:32 AM
engatwork's Avatar
engatwork engatwork is offline
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 13,648
You can make up a little "press" tool by using a piece of all thread, flat washers and some nuts. Spray the bushing down good with SylGlide or something similar and compress it till it is in position. If they are old and worn enough there will not be anything left to take out - it will already be gone.
__________________
Jim
Reply With Quote