|
Use the lowest wattage iron, put the shrink tubing right up to the head and later cover anything showing with good quality tape. BE SURE to put a heat sink, (a small alligator clip, a hemostat, whatever), on the leads to the thermistor before soldering and do it as fast as possible so you don't overheat it. Thermal compound can be purchased at any Radio Shack.
Good luck!
__________________
'76 240D-Sold
'78 240D-Sold
'85 300 SD, 165K-Sold
'88 300 TE, 165K-Sold
'64 Porsche 356C Cabriolet- under restoration
'86 560SL 124K Miles-Sold
'94 320E Wagon, 74K Miles-128K Miles JUNKED
'06 E350 Wagon, 84K Miles
07 SL550, 14K Miles
|