http://www.peachparts.com/shopforu...ad.php?t=99833
i hope that is still a good site i copied it to paper and i also do trans work - its not that bad just dont mix the shims in the rear of the unit that has to come apart for a snap ring to remove gear set -- also at the bottom of both drums their are riverted plates that have O rings sealing them a kit is supplied with 10/32 screws to drill the riverts out and tap the holes it comes with instructions, if you dont replace them it might slide around going into gear -- also the downshift cable ( boden cable ) is when it shifts and the modulator is how firm -- 200 bucks for the kit with out bands they are 300 each but are good for life in most units -- one of the servos is a push to remove the other can take the tip of your finger off if not carefull -- let me know if you need any other info - jz