Loosen the bolts at the exhaust manifold and the support at the trans and push the pipes up to get more clearance, a small jack would be helpful. Tighten all the bolts. You do have the support at the back of the trans don't you? Make sure all the exhaust rubbers are installed.
__________________
Regards
Warren
Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor
Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL
ENTER > = (HP RPN)
Not part of the in-crowd since 1952.
|