Thread: Pertronix and Flamethrower Coil
View Single Post
  #6  
Old 01-06-2009, 04:57 PM
Arthur Dalton Arthur Dalton is offline
Registered User
  
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
The feed wire you want is the one from the Ignition Switch..and then make sure that your coil does not have a ground wire on the Neg side...some of the Early Trans Ign switched the pos. side of the coil and used a ground wire on the coil Neg.. { Version 1 ] You do not need any of that.
__________________
A Dalton
Reply With Quote