Thread: suspension
View Single Post
Old 09-10-1999, 10:44 PM
Posts: n/a
I have a 99 SL 600 I'm fixing. THe suspension was ripped out from under it. I Repaired it meticulously but the hydralic suspension in the front won't work. The rear works fine. I even took off the fitting from the top of the shock and filled with mercedes fluid. All the lines are connected correctly and the wiring routed correctly. I bled the valve under the driver side by the sway bar too. Some air came out but then no air, just fuid. What is the trick to make it work ?. Oh , and the switch on the left of the dash that controls it seems to operate correctly too, thank you, Will T.