Improvised Tool!
I read an earlier post of Alastair's regarding making this tool an it sounded like a pretty good idea! You obtain 2-4 of the retainers, place them in place on the splined nut on the IP or on an extra splined nut off the IP, so as to hold them in the proper aligned position, and fasten them together (welding seemes the best, but bolting would probably work) then fasten a handle of sorts, again welding a handle would be best but a small od pipe bolted and epoxied should work I'd think! Here's a pic of the retainers, the flat steel pieces.
|