Quote:
Originally Posted by hanno
When mine was acting up, the switch itself was binding due to pressure from the connector and harness. Minor rerouting solved that. I assume yours is mounted correctly so that the linkage activates it properly?
|
Yes, the switch is mounted correctly. The switch and new harness to the switch were checked before installation. Unfortunately, there appears to be a power issue since I have no power at the connection under the dash. I checked the fuses and other things function that share fuse 7. I have been working a little bit at at time and really need to study the wiring diagram.
Previously, the backup lights would work only when the old cable was "wiggled" at the switch. With new parts I am a bit bewildered to have nothing at all now.