Quote:
Originally Posted by Bizarre
its cool now, fixed the problem.. just changed the "ground" cable between the overpressure sensor and the valve, works perfectly, thanks for every reply very helpfull... specially thanks to compress ignite for the great diagrams
|
I HAVE THE SOLUTION! The pressure and temperature sensor is not guilty. The problem is the switch integrated in the mechanism of acceleration. No need to change any cables only have to clean and align the switch to connect when you move the acceleration cable. The mechanism has a two switch, one for overload protection and the other for AC clima. You must adjust to the overload switch to do "click" when you move the accelerator mechanism. It,s very easy only you need a key 7 and 5 minutes to do the job. When the job is finished you must listen a click of overload valve (the key in contact position) when you move the accel. mechanism. Thanks for your help and colaboration -PROBLEMA SOLUCIONADO