View Single Post
Old 05-13-2002, 06:21 PM
Billybob Billybob is offline
Join Date: Nov 2001
Location: Cape Cod Massachusetts
Posts: 1,427
Lightbulb Or?

I'm assuming that the difficulty is that a socket/ratcchet combo is too tall to fit between the bolt head and seat above. You could always use a stubby (or ground down) socket and the type of adapter that has a square on one side (for the socket square drive)and a hex on the otherside, this will give you the socket height plus about 3/8", then use an open end wrench to turn the adapter/socket comb.
Reply With Quote