Quote:
Originally Posted by Oracle12345
replacing the ignition switch isnt that hard .....
remove the 10mm holding the clamp together and put the key in and turn it to remove the plug connector......
|
Pretty much it.
In a pinch, I pulled one in a salvage yard without doing anything more than wiggling the electrical plug off the back, and blindly removing the three common screws with a stubby screwdriver.
Just remember to disconnect the battery before you start. At some point, you'll get the bright idea of using a screwdriver to help with wiggling off the electrical plug, and you don't want to be sticking metal around there with power to it.
