View Single Post
Old 05-15-2002, 04:59 PM
engatwork's Avatar
engatwork engatwork is offline
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,234
Bearing pin removal on E320 chain guide

Is the bearing pin pictured in this photo supposed to just pull out? The CD did not go into alot of detail.
This is keeping me from pulling the head off.

I'll put together a "puller" for this pin tomorrow - I just want to make sure it pulls out. If not - then what do I have to do to disconnect around this slide rail to allow me to remove the head.


Last edited by engatwork; 05-15-2002 at 07:25 PM.
Reply With Quote