Valve Seal Question.
AFTER replacing the seals on two cyl's I read the manual.
The old seals were installed with the spring facing up & metal cup down. Not knowing any better, I did the same. The manual diagrams look like it should be the other way around.
Which is correct??
And if the spring goes down, can I pull off the 4 seals already installed, and correct them, or did I already F them up and need new?
Thanks,
__________________
Thanks,
Mike
'83 300D
'87 Volvo DL Wagon
'88 420SEL (SOLD)
'98 Toyota Camry SE V6
'96 Ford Brono XLT
'94 Mercury Villager
'46 Willy's CJ2A
'40 Packard 110 4DSD
"Just another squirrel, trying to get a nut"
|