How to get the fan and clutch off.

First you need to make a tool out of 1/4 gauge wire. bend one end with around a 3/4 inch angle. You need a 7mm allen key and use a socket extension see foto 1



Remove the fan shroud and drape it over the fan top.

Next the special tool you have made needs to be inserted in the pulley at the rear of the fan. you will find a notched section




Insert your special tool in the notch and turn the fan until you find a hole in the pulley which will lock the fan from turning.



Use your 7mm allen key and socket extension to remove the bolt holding the fan on.



Et Viola.