It's off after going through the ordeal with the upper chain guide rail pin. I ended up pulling the lower cover off too. I have attached a picture of the block and I suspect the leakage was either at the passengers side front or rear of the block. I don't know. Should the area where oil was getting through to the coolant be visible? By the time I got the head pulled the gasket was distorted in a couple places and you could not tell too much about it. I will post a picture of the new head gasket when it is in place. Looks like I have a couple days worth of clean up to do now before starting to put everything back together.
Can anyone tell me if this engine is sleeved?