View Single Post
  #3  
Old 10-05-1999, 10:21 PM
Benzmac Benzmac is offline
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
After a leak is repaired on the hydraulic systems, you usually have to jump start the system by disconnecting the arm that goes to the leveling valve and moving it in the loaded position with the engine running on a drive on lift. Watch the rear until it raises and reconnect in the original spot. IF this doesn't work, check the accumulators.

------------------
Benzmac:
1981 280GE SWB
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM