View Single Post
  #3  
Old 05-25-2002, 04:57 PM
mccan
Guest
 
Posts: n/a
Congrats. on the acquisition. If you will pick up a haynes manual, all will be clear. The diagram in the book help me a lot. It is a remarkably simple job. Just give yourself plenty of time so that you are not rushed at any point. As for turning the egine, I turn the power steering pulley with an adjustable wrench (plugs pulled). The 14mm wrench: I heated and bent one to 45 degrees (dropped in cold water to temper) and then ground off about half the thickness an the bent end. Works great.
Reply With Quote