Some what a simple job if you have a "factory" wrench OR one that is shaped just right.
The clearance specs should be on the valve cover, if not then set the intakes to .004" cold & the exhaust to .010" cold.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
|