Thread: M103 Cylinder Head Bolt did not torque up like others. Stripped?
View Single Post
  #7  
Old 05-29-2002, 03:21 PM
engatwork's Avatar
engatwork engatwork is offline
Registered User
  
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 13,666
I know this is hindsight but always get a bottom tap of the proper size and chase/clean out those cylinder head bolt holes, make sure all liquid is out from the bottom of those holes and lightly oil the threads of the head bolt and the top of the head bolt washer. The hardest part is getting that liquid out from the bottom of those holes.
__________________
Jim
Reply With Quote