View Single Post
  #5  
Old 05-30-2002, 03:29 AM
the_good_fellow's Avatar
the_good_fellow the_good_fellow is offline
07 E320 Bluetec 7 pistons
 
Join Date: Jul 2001
Location: Houston, TX
Posts: 170
Ryan,
you are getting close. I had posted a thread about this a while back. Here, I'm posting it again. go to the front passenger side remove the floormate, there is a piece of black plastic panel, lift it up you'll see a 4 way connector with yellows vacuum lines connected to it. one is the cabin line you mentioned. the other three go to each door(passenger and rear doors) disconnect them one at a time and plug it with golf tee, turn the key on driver's side door to lock or unlock. it the pump getting time out you'll have to disconnect/connect the wired connector at the pump. repeat these steps for the rest of the doors.

The other way around is to use a "Mityvac" on each line to the door.

Make sure there is no crack on the 4 way connector too.

Good luck!
__________________
BJ

09 GL320 Bluetec 65K+
07 E320 Bluetec 43k+
05 Nissan Frontier NISMO 4X4 72K+


07 Kawasaki Vulcan 900 5k+ gone
87 300SDL 158k+ gone
91 300D 113k+ gone
83 300SD 220K+ gone
89 300E sold
87 190E sold
83 380SEL sold

http://banners.wunderground.com/bann...TX/Houston.gif
Reply With Quote