View Single Post
Old 05-30-2002, 01:40 PM
rich30769 rich30769 is offline
Registered User
Join Date: May 2000
Posts: 317

I installed a new head gasket when I reinstalled the head. I hope that's what you mean and not did I repull the head and install another head gasket after the car ran hot. I didn't have it running that long. Once it started to run hot I shut it down.

Yep, that's the screw that I removed to bleed the system. Ya have me worried Paul. Post back . I 'm sure all is good though. Drove the car yesterday and except for the slight miss/rough idle everything seems fine. The rough idle was there before I pulled the head. Was hoping the guides and the seals were the culprit to thst symptom.
1986 300E

Last edited by rich30769; 05-30-2002 at 01:45 PM.
Reply With Quote