View Single Post
Old 06-04-2002, 12:23 AM
Posts: n/a
--pry out the handle cover carefully.
see the indent? use a flat screw driver, it will come off easily.

--you can see the 2 torx screws-remove them.

- remove the torx screw.

--remove label by pushing to one side and then pull. Remove torx screw.

--pry out the speaker cover carefully starting at the top. Use a small screw driver and carefull not to scratch the paint.

Pull the paneling starting from the bottom. It is held by several push pins, once they are out, lift the paneling. Be carefull with the wires behind the panel.
I hope this helps.
Reply With Quote