The most common cause for this code is a open circuit in the solenoid that allows the cam advancer to change positions.
Also the cam gear itself can bind & that also will cause this code.
THIS code is generated after only 1 test & if the oil is dirty(at the end of oil cycle) then you might not even have a problem at all.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
|