Quote:
Originally Posted by Matt L
No vacuum will remove any moisture from the dryer, unless you put the dryer in a very hot oven. Your heat gun isn't going to help. The dryer is designed to hold that water, and hold it, it does.
But it's your car, care for it however you want.
There is a very slight positive pressure in the dryer. You may not notice it. If yours had no pressure, or if the caps were insufficient, complain to your supplier and not to me.
|
i have never seen one with caps that will seal it that tight. that was both working for a parts supplier and a automotive shop. i guess we had better complain to fastlane too then. as the one in the picture has a plastic cap on one fitting and none on the other, or is it a display model?