These parts are from a 1980 300 TD non-turbo car, this is an early type interior that has the "loop" style carpeting.

Front seats, Driver's and Passengers Black MB Tex, with driver's arm rest and both head rests, and early style manually adjustable lumbar pad on both seats. Seat back nets are the chromed steel frame style. Both these front seat's coverings are in excellent condition, no rips, tears, wear, stiching issues. The driver's seat is in great condition as the PO had used a seat cover. The seat tracks for height and fore-aft adjustment have rusting and would need to be cleaned up if you wanted to not install these seat bases and backs on your own tracks, shipping would be somewhat less without the track's weight. I have not yet closely examined the seat springs but I assume the passenger side is good and the driver's side is tired. There is no obvious issue with the driver's spring such as clacking or popping when you sit on it. I will update this once I have the seat out and upside down!

Rear seats, seat base and back are Black MB Tex, no damage wear or tear. These are 100% seats, they are not split! There are no head rests.

Doppelroller/Cargo Net & Cover this is a complete and fully functional unit with only the smallest dings on it's vinyl covering of it's case. The net and MB Tex cover are in perfect condition, both securing end buttons on the net are intact and both the hooks on the cargo cover are intact! The mounting plates for attachment to the seat back are included as are it's requisite screws. The four aluminum recepticle plates that the cargo net attches to when extended are included as are their requisite Allen head bolts to mount these. The rear hatch trim card upper trim panel which runs from side to side just below the rear window and covers the wiper pivot is included. This panel has the openings with their hole trim. The two bales which mount to the rear hatch and are accessed through the above mentioned trim to which the cargo cover hooks are secured to keep the cover extended when the hatch is both open and closed are included along with the requisite screws. This is a complete installation package.

The cargo area and wheel well cover carpets are available, other trim parts are possibly available, just let me know what you might need.

The two front door cards are in excellent condition with both their map pocket intact, the driver's door panel has a single blemish which is two screw holes where a folding cup holder was mounted. The two rear door cards have some minor damage and are not perfect. These doors are electric windows without a hole for a manual window crank.

The front and rear floor mats are gone.

There are a few other useful parts a driver's side rear tail light, both exterior manually adjustable rear veiw mirrors, that I can think of off hand.

The front and rear bumpers look to be in quite good condition, the front is missing half of the impact strip but the chrome is quite good. The rear looks very good from above and from straight on, the integral aluminum reverse light mounting is not intact, one side is missing and one side is cracked and disconnected along its bottom edge. Both shocks are thoroughly secured though. The impact strip is complete and has only the smallest minor scratches. This bumper is in very good cosmetic condition and could be re-engineered to address the reverse light issue.


The cargo cover installation package is available for $400, the front seats $100 each, the rear seat $100, door cards $50 each, rear bumper $150, mirrors $40 each, any other parts just ask. I will be getting some pictures of the parts mentioned and will post them when I do. Everything is first come cash in hand, first served. Thanks and good luck!