View Single Post
Old 08-09-2009, 10:56 PM
Cr from Texas Cr from Texas is offline
Registered User
Join Date: Feb 2008
Location: DFW area (north side)
Posts: 1,288
Originally Posted by sixto View Post
The trouble will be working on a seat at the PYP if you can't get power to it. You have to slide the seat aft to get to the very tight screws that go up into the seat at the front corners. Hopefully you can get to the 4 bolts attaching the seat to the car and there's room to open the door enough to get the seat out.

87 300D
Exactly! I found a set of newer seats at Garland PNP and wanted to try to fit them into my 123. No power, seat in low position. I could get the covers and the back but no luck on the bottom frame unless I could power the seat and change postion to get to the bolts.

I wasted too much time and gave up.

Repaired my 123 seats including having an uphostery shop sew in new MB tex panels to repair a couple of rips.
1983 300D, bought new, 215k+ miles, donated to Purple Hearts veterans charity but I have parts for sale:
Reply With Quote