Quote:
Originally Posted by europower
Remove the two small screws at the back of the door and remove the plastic c shaped piece, then remove black plastic piece at top of handle, there you will see a 10mm nut that you can remove, next you will very carefully remove the panel by pulling it up, be super careful not to break tabs around the center and bad of the panel, they are like little latches and the upward movement pulls them out, do not pull panel straight at you.
Sometimes if this i've described sem impossible check at bottom of panel that there hasnt been glued, if it has you will have to pry gently before oulling it upwards.
Hope this helps
Ep
|
after you remove the plastic panel that holds the rear window switch, you need to remove the door handle, and you do that by grabbing the entire handle frame, and pushing it forward (towards the front of the car), then out, and disconnecting it from the metal rod that attaches to the door lock mechanism