Quote:
Originally Posted by LMN_
I removed the working portion of a blown out glowplug, drilled it out and welded a 5/16" drill bit into it.
Remember to use anti-seize to catch the carbon on the bit when reaming.
|
In the Service Manual it tells you to use Grease in the Grooves (Flutes) of the Reamer to trap the Carbon. They do not give a special type of Grease.
I use Wheel Bearing Grease becaust that is what I have available.
I tried Vasoline but it is too runny at normal temps.
If any Grease gets in the Prechamber I think it would burn. I am not sure what antiseeze would do. Although, antiseez is less likely to come out of the Grooves.