View Single Post
  #20  
Old 10-02-2009, 09:37 AM
mhin1956 mhin1956 is offline
Registered User
 
Join Date: Aug 2005
Location: Cordova,TN
Posts: 138
center element

trick I found was that you need to remove the right side center vent grill. The vent behind is a flexible rubber boot, held in by a couple of push pins. From that you can reach the small screws w/ LONG extension on small socket. Unit will disengage from door w/ some twisting (gently) and a few words. Putting new one in place,use long screwdriver to encourage the bent lever on the vac to engage into the flap. Use tape on screws and socket to replace screws. Have done this 3 different times now..about 30 min.

good luck!
Reply With Quote