View Single Post
  #2  
Old 10-10-2009, 08:35 PM
Junkman Junkman is offline
Registered User
 
Join Date: Sep 2006
Location: Middle TN
Posts: 4,154
Whenever a car won't crank, do the simple things first. Make sure connections are clean & tight ie use volt meter & look for voltage drop between terminal & battery cable. one end of the cable & another. Do you get full voltage to the large solenoid terminal? Are your grounds good. Use meter to test fuses. Check to see if you're getting full battery voltage to the small wire on the solenoid with the key to start. A wiring diagram is helpful after basics are tested. Have you tested your ignition switch & combo switch?
Reply With Quote