Quote:
Originally Posted by tecqboy
The roll bar controller for a 90 is different then the controller for a 96. The system evolved over the years. The 90 is much simpler and easier to reset without going to a dealer. You can build a simple home made tool from radio shack parts for the 90 which can scan and reset the error codes. It's possible in either case that you have a tripped or bad rollover switch. There are a pair on the rear axle. Much has been written on the roll bar controller and how to build the tool. Use the forum search feature.
|
Thanks tecqboy.
I did not know there was a difference between the years.
I have gone through those tests, and checked the rear switches.
The answer was the controller is bad, but I wanted to rerun everything and double check. Haven't had the time.
Also being pretty handy etc, I also planned to remove the unit, check it, and check and clean all the connectors.
Unfortunately I have the rear seat option (aftermarket) so it's a pain to remove and get to the controller. Not difficult, just a pain.
Thanks