Quote:
Originally Posted by texascadillac42
I have searched several sources, and looked for this part, but obviously have not tried hard enough...
I am in the process of putting an OM617 into my Unimog, and want to delete the vacuum pump since I have no use for it on my motor. I have seen block off plates made to cover the hole where the vacuum pump normally goes, but I cannot find a part number or source.
I am also looking for a plate that would cover up the hole where the hydraulic pump on a 300TDT would normally go, on the head.
Any help would be appreciated, thanks.
|
Hi
I seem to remember that ************** sells the blocking plate for the
SLS pump. Shouldn't be that hard to make yourself. You could try laying the pump on cardboard and spaying with WD40 to mark the outline and bolt pattern. Use that as a template for cutting from aluminum.
Joseph