View Single Post
  #5  
Old 12-11-2009, 04:12 PM
sal Escoto sal Escoto is offline
Registered User
 
Join Date: Nov 2008
Posts: 30
Update. Initially was concern about putting the primer where the nut was because the first time I looked there was a spring but after looking at the bottom of the nut, it had the same grove as the primer. So added the new primer and the "check valve" seems to be working. Better priming but still have air, no start. Too cold at the moment to be out there for now. I did replace all my copper washers
Reply With Quote