View Single Post
  #3  
Old 12-26-2009, 01:18 PM
DREISBORD DREISBORD is offline
David.....MB enthusiast
 
Join Date: Dec 2009
Location: Phialadelphia's Main Line
Posts: 11
Thank you so much for your reply.

As the bulb's white opaque "covers" fit flush with their surrounding plastic....just push them upwards?
Are they not held in place by (breakable plastic) retaining clips?
And, if they're pushed upwards, and then aside will the securing screws be then exposed above or next to the actual lamps & lampholders?

In addition, with the lamp "covers" appearing to only be able to be pushed upwards..... once the replacement domelight has been screwed back into place...how would I then get the lamp covers pressed back down & into their original flush fit with their plastic surround?

Sorry if this seems naive. Just want to get it right.
RPM55, again, thank you so much for your reply, look forward to your further advice.
Very sincerely,
David

Last edited by DREISBORD; 12-26-2009 at 01:47 PM.
Reply With Quote