View Single Post
Old 01-02-2010, 04:05 PM
mplafleur's Avatar
mplafleur mplafleur is offline
User Friendly
Join Date: Sep 2001
Location: Lathrup Village, Michigan
Posts: 2,939
Originally Posted by glenlloyd View Post
Thanks Nate for providing the image, I believe it is shown in there although the curved U shaped fitting is not shown.

#668 is the small inline filter, #557 is the plastic tube and #534 is the small clip shown at the very bottom in my photo. #609 is not what's at the end of my tube. Perhaps someone has been in there and changed things...incorrectly...don't know.

The big question now is where is the correct #609 fitting and what does #609 go to and what is the function of this vac line?

As a side note the schematic doesn't exactly match up with what's going on near the right headlight. That doesn't mean that my setup isn't correct, just that there is a difference. I don't know whether this is due to someone having taken things apart and then not knowing exactly how it goes back together.

Steve A
That's a great diagram. Do you have one for the OM603.961? ('86 300SDL)

Post Script:

Let's see if I can dig one up from that EPC site first...
Michael LaFleur

'05 E320 CDI - 86,000 miles
'86 300SDL - 360,000 miles
'85 300SD - 150,000 miles (sold)
'89 190D - 120,000 miles (sold)
'85 300SD - 317,000 miles (sold)
'98 ML320 - 270,000 miles (sold)
'75 300D - 170,000 miles (sold)
'83 Harley Davidson FLTC (Broken again) :-(
'61 Plymouth Valiant - 60k mikes
2004 Papillon (Oliver)
2005 Tzitzu (Griffon)
2009 Welsh Corgi (Buba)

Reply With Quote