My windows are up, My windows are up . Bob, When you said harness X and harness Z I finally got it. I am so happy right now...Just wanted to Thank each of you again. The information was right in front of me. I just did not understand Z as being a harness and X being another harness.
To make the driver side window go up: On the 12 pin X harness (It will be to the right as you look in the compartment)
Connect 12 volts to pin #2 (Will be a green wire.
Connect ground wire to pin #1 (Will be a black wire)
To make the window go down reverse your 12 volt wire and ground wire.
On the passenger side, use the Z harness to the left as you look in the compartment.
It will be the same procedure.
Thanks again, This forum has helped me so much over the years, gene
|