|
I actually just went ahead and pulled out the reservoir after rocking it a bit and it popped out.
I removed the old seals and put the new seals in the MC and pushed the reservoir down. Its in there good but I noticed its not all the way in. I popped the reservoir out again and this time took the seals and pushed it into the reservoir nipples instead of in to the MC. This makes a better fit around the reservoir outlet since the seal goes all the way in. Only problem is it would not push down into the MC with the seals around the nipples. So I reverted back to the first method.
Not sure what the correct method is but it appears to be holding in good. except its about 1/8" out.
__________________
the sooner you start... the sooner you'll get done  If it ain't broke, don't fix it.. Its always simpler to tell the truth... 
2007 Honda Accord EX
2007 Honda Accord SE V6
96 C220
97 Explorer - Found Another Home
2000 Honda Accord V6 - Found Another Home
85 300D - Found Another Home
84 300D - Found Another Home
80 300TD - Found Another Home
Previous cars:
96 Caravan
87 Camry
84 Cressida
82 Vanagon
80 Fiesta
78 Nova
Ford Cortina
Opel Kadet
68 Kombi
Contessa
Last edited by tobybul; 01-13-2010 at 08:19 AM.
|