View Single Post
  #1  
Old 07-10-2002, 03:29 AM
billcolburn
Guest
 
Posts: n/a
ac clutch cycling

86 300 e
in order to activate compressor clutch I have hot wired it to the fuse box (always on)
I have the correct charge in the system
I have continuity through the preasure switch
The normal system is sending 6 volts to the preasure switch (not enough to opperate the clutch)
the system of course does not cycle with this set up
with the hot wire disconected the system will work sporadically.
any help would be greatly appreciated
thanks
bill
Reply With Quote