View Single Post
  #1  
Old 02-06-2010, 02:53 PM
JRR4948 JRR4948 is offline
Registered User
 
Join Date: Feb 2010
Posts: 12
1991 W124 300E need wiring help

I have a 1991 300E with an aftermarket Clarion DXZ275MP with the wire harness included for 4 speakers, power antenna, memory etc. My 300E has 6 speakers - dash, doors, rear shelf along with the working fader wheel in the console all stock. They cut and spliced into one of the speaker plugs and tapped into the power wires. All of the plugs and wires are still here to resolder and connect back even the plug that was cut. I would like to rewire or tap the Clarion directly into the 6 speakers: 4 on the front and two on the rear. I cannot figure out which speaker wires are directly associated with each speaker and which is the ground wire. There is a very, very thin black wire. Is that the ground? If I decide to use a tap, which wires are for each of the 6 speakers? All of the Clarion information is on the internet for their wire harness. Thank you very much.
JRR
Reply With Quote