View Single Post
  #2  
Old 07-16-2002, 01:16 AM
Speedtek Speedtek is offline
They call me Darth Speed
 
Join Date: Apr 2002
Location: Hawaii
Posts: 327
Brakes

New rotors are not heat cycled like used ones. If your rotors are 1mm near the stock thickness then go ahead and re-cut and use them. 1mm will not make that much difference on rotor temp.

Also consult the company you are buying the pads from about how you break them in. I usually drive around 50 miles of stop and go traffic then one run up the mountain to break them in.
no hard braking until the pads are well seated.
Reply With Quote